Kenwood C-707I - Manual (Page 27)

English 27
Handling precautions
Be sure to read the instruction manual that comes with
the iPod you are using.
This system does not come with an iPod. It is up to you
to purchase an Apple iPod separately.
Certain conditions while using an iPod can cause
contents stored on the iPod to be lost. Note that
Kenwood will not be held liable for any losses arising
out of loss of stored contents.
Handling an iPod
Supported iPod models
Important Information
To connect an iPod, you will need a PNC-iP120 iPod
connection cable.
The following are the iPod models that can be
connected to this system. (As of November 2007)
Controllable iPod iPod Software version
iPod 4th Generation (Click wheel)
20GB/40GB
3.02 or more
iPod mini
4GB/6GB
1.2 or more
iPod 4th Generation (Color display)
20GB/30GB/40GB/60GB
1.0 or more
iPod nano (1st Generation)
1GB/2GB/4GB
1.0 or more
iPod nano (2nd Generation)
2GB/4GB/8GB
1.0 or more
iPod video (iPod 5th Generation)
30GB/60GB/80GB
1.0 or more
iPod nano 3rd Generation (video)*
4GB/8GB
1.0 or more
iPod classic* 1.0 or more
* Some functions not supported.
This system supplies power to your iPod, which means
you can enjoy listening to music while charging your
iPod. To do this, the system must be turned on and iPod
must be selected as the source.
Apple and iPod are trademarks of Apple Inc.,
registered in the U.S. and other countries.
en02_c-707i.indd 27 en02_c-707i.indd 27 12/28/2007 4:14:42 PM 12/28/2007 4:14:42 PM