Kenwood C-707I - Manual (Page 62)

C-707I 62
External Components
C-707I
Adjusting the Input Level
Use the procedure below to adjust the input level for the external
component connected to the [AUX IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
Select AUX as the source.
1 1
Adjusting the input level also changes the volume of the external component
connected to the [AUX IN] terminal. z
2 2
Adjust the input level.
Press the [<] or [>] key.
You can adjust the input level in a range
from –3 to +3. z
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
Press the [AUX] key.
D. AUDIO AUX
en08_c-707i.indd 62 en08_c-707i.indd 62 12/25/2007 11:44:54 AM 12/25/2007 11:44:54 AM