Kenwood C-707I - Manual (Page 40)

40 C-707I
CD/USB
Press the [CD E] key or the [USBE] key to begin
playback.
“PGM” appears on the display.
If you want to select more tracks, repeat steps 2 and 3.
You can select up to 32 tracks for playback. If you attempt to select more
tracks, the message “PGM FULL” appears on the display. z
5 5
44
Use the number keys or the [ G] and [H] keys to
select the track or fi le you want to listen to.
Press the [ENTER] key.
If you enter the wrong track or fi le in a program, press the [ENTER] key and
then the [CLEAR] key. Return to step 2 and repeat the procedure. z
2 2
33
To cancel program mode
Stop playback and then press the [CLEAR] key.
This erases the current program.
To remove a track from a program
z Stop playback and then press the [P.MODE] key.
z Next, each press of the [CLEAR] key will sequentially delete the last
track of the program.
Use the [<] and [>] keys to select a program number. When the
number of the track you want to delete is displayed, press the
[CLEAR] key.
To add a track to the end of the program
Stop playback if it is in progress. Next, perform steps 1 through 5 of the
above procedure.
Checking the contents of the program
Stop playback and then press the [ G] or [H] key.
„
„
„
„
Turning off the system, ejecting the CD, or disconnecting the USB device erases the
current program. z
Track 10 selected as program track 1
Program number Track number
en03_c-707i.indd 40 en03_c-707i.indd 40 12/19/2007 5:20:00 PM 12/19/2007 5:20:00 PM