beautypg.com

Handling discs, Handling usb devices – Kenwood C-707I User Manual

Page 26

background image

C-707I

26

Important Information

Cautions on CD discs

Always use a disc carrying the

marking.

A disc without this marking may be unable to be played
back correctly.

The disc rotates at a high speed during playback. Never
use a cracked, chipped or greatly warped disc. Otherwise,
damage or malfunction of the player may result.
Also, do not use a disc with a non-circular shape as this
may result in malfunction.

Handling precautions

When handing a disc, never touch the playing surface.

Discs playable on the system

This system can play back CD (12 cm, 8 cm), CD-ROM, CD-
R, or CD-RW discs, or the audio part of CD-EXTRA discs.

Use of an 8 cm CD adapter is not supported.

Notes on CD-ROM/CD-R/CD-RW discs

If the CD-ROM, CD-R or CD-RW disc being used has a
printable label surface, the label surface may cause
sticking that makes it impossible to remove the disc from
the system. To prevent malfunction of the system, do not
use such discs.

Handling Discs

Handling precautions

Be sure to read the instruction manual that comes with
the device you are using.

This system does not come with a USB device. It is up
to you to purchase a commercially available USB device
separately.

The [

USB] port on the front panel of the main unit

supports USB2.0 (Full speed).

Do not use a USB device connected via a USB hub.

Certain conditions while using a USB device can cause
contents stored on the USB device to be lost. Note that
Kenwood will not be held liable for any losses arising
out of loss of stored contents.

Handling USB devices

Supported USB devices

The following are the limitations on the type of USB
devices that can be used and on the scope of their use.

USB mass storage class compliant

Consult your retailer to fi nd out whether your USB

device is USB mass storage class compliant.

Maximum current consumption of 500 mA

Use of a USB device that does not comply with the

above conditions may result in improper playback of
track fi les. Even if a USB device does satisfy the above
conditions, certain device types and conditions may
make proper playback impossible.

This system supplies power to USB devices, which
means you can enjoy listening to music while charging
your device. To do this, the system must be turned on
and USB must be selected as the source.

en02_c-707i.indd 26

en02_c-707i.indd 26

12/28/2007 4:14:42 PM

12/28/2007 4:14:42 PM