Konica Minolta MAXXUM 3 - Manual (Page 56)

56
APPENDIX
ACCESSORY INFORMATION
Accessory Flashes
The following accessory flash units are compatible with this camera:
Program Flash / Maxxum Flash 5600HS (D)
Program Flash / Maxxum Flash 3600HS (D)
• The flash cancel indicator is displayed on the data panel with no other
icons when an incompatible flash unit is attached.
• An accessory flash cannot be connected to the camera using a cable.
This manual contains information on products and accessories
available at the time of printing. To obtain compatibility information
for products not contained in the manual, contact a Minolta service
facility listed on the back cover.
All Minolta AF lenses can be used with this camera.
• Only Minolta A mount lenses are compatible with this camera. MD and MC
series lenses cannot be used.
• The certain lens attachments will prevent proper exposure during flash
photography. Do not use filters which alter the required exposure such as
neutral density or polarizing filters. Do not use close-up filters or lenses.
• ADI metering is compatible with Minolta D series lenses (p. 49).
• Use of a lens hood is recommended to avoid flare (non-image forming light
that degrades image quality) when taking pictures without flash.
• Remove the lens hood before using the camera’s built-in flash.
Lenses
AA Battery Pack BP-200
AA Battery Pack BP-200 allows the camera to be powered by four
AA alkaline or Ni-MH batteries.
• AA-size lithium batteries cannot be used.
2165_E.qxd 03.2.10 2:06 PM Page 56