Konica Minolta MAXXUM 3 - Manual (Page 13)

13
5. Open the back cover and
load the film (p. 23).
• Align the film tip with the red
mark, then close the back
cover.
6. Center the subject in the wide
focus frame. If using a zoom
lens, rotate the zooming ring to
frame the subject (p. 28).
• The camera will focus and set exposure
automatically when the shutter release
button is pressed partway down.
7. When the focus signal appears
in the viewfinder, press the
shutter-release button all the
way down to take the picture (p.
28).
• Use focus lock if your subject is off-
center and outside the focus frame
(p.30).
2165_E.qxd 03.2.10 2:06 PM Page 13