Konica Minolta MAXXUM 3 - Manual (Page 11)

Blinks
11
Viewfinder
• When the flash signal does not blink after taking the picture, the subject was
not within the flash range. Please check the flash range (p. 32).
Wide focus frame (28) Spot-focus area (46)
Flash signals (33) Focus signals (29)
Flash output was sufficient to provides correct expo-
sure.
Steady
Flash is charged and will fire when the shutter-
release button is pressed.
Flash signals
Focus is confirmed with a moving subject. The camera
continues to focus while the shutter-release button is
pressed partway down.
Steady Focus is confirmed and locked.
Focus cannot be confirmed.
• The shutter is locked (p. 31).
Blinks
Steady
Focus signals
2165_E.qxd 03.2.10 2:06 PM Page 11