Konica Minolta MAXXUM 3 - Manual (Page 24)

24
3. Insert the film cartridge into the
film chamber.
• With the top of the cartridge down, insert
the film at an angle into the bottom of the
film chamber. Push the cartridge into the
chamber until it clicks into place.
FILM
GETTING STARTED
4. Extend the leader between the
guide rails to the index mark.
• Hold the film cartridge down so that the
film lays flat.
• If the film tip extends beyond the index
mark, take the cartridge out and rewind
the excess film back into the cartridge.
5. Close the back cover.
• The camera automatically advances the
film to the first frame.
• Take care not to catch the camera strap
when closing the back cover.
2165_E.qxd 03.2.10 2:06 PM Page 24