Kenwood KRF-X9090D - Manual (Page 7)

7 EN
Names and functions of parts
Remote control unit
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes.
e
1 LCD (Liquid Crystal Display) e
Shows the operation mode of the remote
control unit.
2 RECEIVER ON key (
Use to turn the receiver on.
RECEIVER STANDBY key
Use to turn the receiver off (standby).
3 Input Selector keys (DVD/6CH, VIDEO 1,
VIDEO 2, VIDEO 3, CD/DVD, MD/TAPE, PHONO,
AV AUX, TUNER)
§
Used to select the input sources.
Source keys (DVD/6CH, VIDEO 1, VIDEO 2,
VIDEO 3, CD/DVD, MD/TAPE, PHONO, AV
AUX, TUNER)
et
Use to select registered components.
4 ACTIVE EQ key ¶
Use to select ACTIVE EQ setting.
5 Numeric keys
Use to input numeric characters. e
Use to select preset radio stations. ⁄
Use to operate other components.
6 TONE key •
Use to switch the status of TONE control.
BASS BOOST key
•
Use to select the maximum adjustment
setting for the low frequency range.
LOUDNESS key
•
Use to switch the status of LOUDNESS.
AUDIO key
SUBTITLE key
ANGLE key
Use to operate other components.
7 MULTI %/fi/@/# keys
Use to control a variety of settings.
Use to operate other components.
TOP MENU key
MENU key
RETURN key
EXIT key
ON SCREEN key
GUIDE key
Use to operate other components.
ENTER key
Use to establish a selection.
Use to operate other components.
SETUP key
(
Use to select the speakers’ settings etc.
SOUND key
‚
Use to adjust the sound quality and the
ambience effects.
8 DIMMER key w
Use to adjust the brightness of the display.
8 key
Use to operate other components.
9 P.CALL 4/¢ keys ⁄
Use for selection adjustments during sound,
set up and preset channel functions.
CHANNEL –/+ keys
Use to select the channels.
0 LISTEN MODE %/fi keys ‡
Use to select the listening mode.
! INPUT MODE key 8
Use to select the Input mode.
@ DISC SEL. key
INPUT SEL. key
Use to operate other components.
# TV key
Use to turn the TV on or off.
$ SOURCE key
Use to turn the other source components on
or off.
% TV MODE key
Use to select the TV equipment.
^ RCV MODE key
Use to switch the remote control unit to the
receiver control mode.
& TV INPUT key
Use to select TV’s input.
* TV MUTE key
Use to temporarily mute the TV sound.
( TV VOL. %/fi keys
Use to adjust the TV’s volume.
) MUTE key •
Use to temporarily mute the sound.
¡ VOLUME %/fi keys §
Use to adjust the receiver’s volume.
™ BAND key º
Use to select the broadcast band.
3/8 key
Use to operate the DVD, CD, MD or VCR
component.
AUTO/MONO key
º
Use to select the auto or manual tuning
mode.
7 key
Use to operate the DVD, CD, MD or VCR
component.
£ SLEEP key w
Use to set the Sleep timer.
÷ key
Use to operate the MD or VCR components.
¢ TUNING 1/¡ keys º
Use to tune the broadcast station.
∞ DSP MODE key °
Use to select any of the DSP mode.
DOLBY VIRTUAL key
·
Use to select the Dolby Virtual Speaker and
the Dolby Headphone setting.
STEREO key
°
Use to switch the listen mode to STEREO.
THX key
‡
Use to switch the status of THX.
§ PAGE %/fi keys
Use to operate other components.
RDS DISP. key
¤
Use to receive RDS broadcast.
PTY key
‹
Use for PTY search.
¶ LEARN key
Use to register other components. e
Use to memorize the operation of the other
remote code.
t
• DISC SKIP key
LAST key
Use to operate other components.
STANDBY
RECEIVER
SOURCE TV
VIDEO2 VIDEO1 DVD/6CH
PHONO MD/TAPE CD/DVD
RCV MODE ACTIVE EQ TUNER
TV INPUT
TV MUTE
INFO
LOUDNESS
ANGLE
BASS BOOST
SUBTITLE
TONE
AUDIO
TOP MENU
/SETUP
RETURN
/EXIT
ON SCREEN
/GUIDE
MENU
/SOUND
ENTER
BAND
– CHANNEL +
MULTI
MULTI
DIMMER
DSP MODE RDS DISP. DOLBY VIRTUAL
AUTO/MONO SLEEP
PAGE THX STEREO LISTEN MODE
LEARN LAST INPUT SEL.
DISC SKIP PTY DISC SEL. INPUT MODE
ON
VIDEO3
AV AUX
TV MODE
TV VOL.
MUTE
P.CALL TUNING
VOLUME
05.7.16, 10:14 AM 7