Kenwood KRF-X9090D - Manual (Page 25)

25 EN
Preparing for surround sound
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the distance between left and right Surround Back speaker.
1 TOGETHER : The distance is 0.3 meters (1 foot) or less.
2 CLOSE
: The distance is between 0.3 meters (1 foot)
and 1.2 meters (4 feet).
3 APART : The distance is 1.2 meters (4 feet) or more.
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
4
Adjust the bass peak level.
A restriction is put on the low frequency so that the bass peak level
will not go higher than the acceptable level when the volume is
increased.
If Subwoofer is OFF, the limitation will affect the low frequency of
the Front Left and Right Speakers.
1 Press the 5/∞ keys or MULTI @/ # keys to select the “BASS
PEAK” and press the MEMORY/ENTER key or the ENTER key.
L R
SP MUTE
A B CLIP
LFE
STEREO
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the bass peak level to –30dB.
• The adjustment range is from – 30dB to 0dB and OFF.
3 For optimum bass peak level, keep increasing the bass peak
level by using the MULTI CONTROL knob or MULTI %/fi keys
while test tone is being output until clip sound is heard from
the Subwoofer or Front Speaker.
SP MUTE
A B CLIP SW
LFE
4 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
5
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the 5/∞ keys or MULTI @/# keys to select the “LFE
LEVEL“ and press the MEMORY/ENTER key or the ENTER
key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the LFE LEVEL.
L R
SP MUTE
A B CLIP
STEREO
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
6
Adjust the AUDIO DELAY.
Depending on video equipments, because of its internal processing
moving image on the Monitor may seem to be delayed compared to
the audio from the speakers. This can be adjusted by audio delay
which delays audio to match the video picture.
1 Press the 5/∞ keys or MULTI @/# keys to select the “AUDIO
DELAY“ and press the MEMORY/ENTER key or the ENTER
key.
SP MUTE
A B CLIP L R
STEREO
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the delay time.
SP MUTE
A B CLIP L R
STEREO
• The allowable setting range is 0 to 200 ms, adjustable in 10 ms
increments.
• Delay is not applied when TUNER, MD/TAPE, PHONO or 6CH
INPUT is selected as an input, or AUTO REC MODE or MANUAL
REC MODE is selected.
• When in 96kHz fs signal playback, the effectable delay time is
up to 100ms.
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
7
Select the display mode.
1 Press the 5/∞ keys or MULTI @/# keys to select the
“DISPLAY MODE“ and press the MEMORY/ENTER key or the
ENTER key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the display mode.
1 DISP SELECTOR : Displays the current input selector.
2 DISP LISTEN
: Displays the current listen mode or THX
mode.
SP MUTE
A B CLIP L R
STEREO
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
8
Lock the settings.
In case that the keys are mistakenly pressed, the setting can be
locked.
1 Press the 5/∞ keys or MULTI @/# keys to select the “SET-
TING LOCK“ and press the MEMORY/ENTER key or the
ENTER key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the lock mode.
1 SETUP LOCKED : Lock the settings.
2 SETUP UNLOCKED : Unlock the settings.
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
9
Exit the SETUP mode.
1 Press the 5/∞ keys or MULTI @/# keys to select the “EXIT“.
L R
SP MUTE
A B CLIP
SL S SB SR
STEREO
2 Press the MEMORY/ENTER key or the ENTER key to return to
the display mode selected in step
7
.
05.7.16, 10:33 AM 25