beautypg.com

Specifications, For your records – Kenwood KRF-X9090D User Manual

Page 64

background image

64

EN

For your records

Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.

Model __________________ Serial Number ________________________

Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

Specifications

Caution : Read this page carefully to ensure safe

operation.

AUDIO section

For Europe

Rated power output during STEREO operation

IEC (20 Hz ~ 20 kHz, 0.09% T.H.D., at 6

) ........ 100 W + 100 W

DIN (1 kHz at 6

Ω) ...................................................... 120 W + 120 W

Effective power output during STEREO operation

RMS (1 kHz, 10% T.H.D., at 6 ) ............................. 150 W + 150 W

Effective power output during SURROUND operation

FRONT
(20 Hz ~ 20 kHz, 0.09 % T.H.D., at 6
one channel driven)

............................................................................... 100 W + 100 W

(1 kHz, 0.7 % T.H.D., at 6 one channel driven) .. 120 W + 120 W
(1 kHz, 10 % T.H.D., at 6
one channel driven) ... 150 W + 150 W
CENTER
(20 Hz ~ 20 kHz, 0.09 % T.H.D., at 6
one channel driven) ..... 100 W
(1 kHz, 0.7 % T.H.D., at 6
one channel driven) .................. 120 W
(1 kHz, 10 % T.H.D., at 6
one channel driven) ................... 150 W
SURROUND
(20 Hz ~ 20 kHz, 0.7 % T.H.D., at 6
one channel driven)

............................................................................... 100 W + 100 W

(1 kHz, 0.7 % T.H.D., at 6 one channel driven) .. 120 W + 120 W
(1 kHz, 10 % T.H.D., at 6
one channel driven) ... 150 W + 150 W
SURROUND BACK
(20 Hz ~ 20 kHz, 0.7 % T.H.D., at 6
one channel driven)

............................................................................... 100 W + 100 W

(1 kHz, 0.7 % T.H.D., at 6 one channel driven) .. 120 W + 120 W
(1 kHz, 10 % T.H.D., at 6
one channel driven) ... 150 W + 150 W

Total harmonic distortion ....................... 0.009 % (1 kHz, 50 W, 6

)

For Australia

Rated power output during STEREO operation

IEC (20 Hz ~ 20 kHz, 0.09% T.H.D., at 8

) ........ 100 W + 100 W

DIN (1 kHz at 8

Ω) ...................................................... 120 W + 120 W

Effective power output during STEREO operation

(1 kHz, 10% T.H.D., at 8 ) ...................................... 130 W + 130 W

Effective power output during SURROUND operation

FRONT
(20 Hz ~ 20 kHz, 0.09 % T.H.D., at 8
one channel driven)

............................................................................... 100 W + 100 W

(1 kHz, 0.7 % T.H.D., at 8 one channel driven) .. 120 W + 120 W
(1 kHz, 10 % T.H.D., at 8
one channel driven) ... 130 W + 130 W
CENTER
(20 Hz ~ 20 kHz, 0.09 % T.H.D., at 8
one channel driven) ..... 100 W
(1 kHz, 0.7 % T.H.D., at 8
one channel driven) .................. 120 W
(1 kHz, 10 % T.H.D., at 8
one channel driven) ................... 130 W
SURROUND
(20 Hz ~ 20 kHz, 0.7 % T.H.D., at 8
one channel driven)

............................................................................... 100 W + 100 W

(1 kHz, 0.7 % T.H.D., at 8 one channel driven) .. 120 W + 120 W
(1 kHz, 10 % T.H.D., at 8
one channel driven) ... 130 W + 130 W
SURROUND BACK
(20 Hz ~ 20 kHz, 0.7 % T.H.D., at 8
one channel driven)

............................................................................... 100 W + 100 W

(1 kHz, 0.7 % T.H.D., at 8 one channel driven) .. 120 W + 120 W
(1 kHz, 10 % T.H.D., at 8
one channel driven) ... 130 W + 130 W

Total harmonic distortion ....................... 0.009 % (1 kHz, 50 W, 8

)

Frequency response

CD/DVD ................................... 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB

PHONO ‘RIAA’ response .............. 40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB
Maximum input level

PHONO (MM) .................................. 40 mV, 1 % T.H.D., at 1 kHz

Signal to noise ratio (IHF’66)

PHONO (MM) ........................................................................ 75 dB
CD/DVD ................................................................................. 95 dB

Input sensitivity / impedance

PHONO (MM) ........................................................... 4 mV / 47 k

CD/DVD, MD/TAPE, AV AUX, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH

.............................................................................. 300 mV / 47 k

Output level / impedance

REC OUT (MD/TAPE) ............................................ 300 mV / 1 k

PRE OUT (FRONT) ....................................................... 1 V / 500

PRE OUT (CENTER) .................................................... 1 V / 500

PRE OUT (SURROUND) .............................................. 1 V / 500

PRE OUT (SURROUND BACK) ................................... 1 V / 500

PRE OUT (SUBWOOFER) .......................................... 1 V / 500

Tone control

BASS ................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)

Loudness control

VOLUME at –30 dB level ...................................... +6 dB (100 Hz)

DIGITAL AUDIO section

Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length

Optical .............................. –15 dBm ~ –24 dBm, 660 nm ±30 nm
Coaxial ................................................................... 0.5 Vp-p / 75

Output level / impedance / wave length

Optical .............................. –21 dBm ~ –15 dBm, 660 nm ±30 nm

VIDEO section

VIDEO inputs / outputs

VIDEO (composite) ................................................. 1 Vp-p / 75

S VIDEO inputs /outputs

S VIDEO (luminance signal) ................................... 1 Vp-p / 75

S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75

COMPONENT VIDEO inputs/ outputs

COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75

COMPONENT VIDEO (CB/CR-signal) ................. 0.7 Vp-p / 75

FM tuner section

Tuning frequency range ................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity
MONO ................... 1.3 µV (75

)/ 13.2 dBf (40 kHz dev, S/N 26 dB)

STEREO ............ 45 µV (75

)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)

Total harmonic distortion

MONO (1 kHz, 40 kHz dev) ....................... 0.2% (65.2 dBf input)
STEREO (1 kHz, 40 + 6 kHz dev) ............... 0.8% (65.2 dBf input)

Signal to noise ratio (DIN weighted at 1 kHz)

MONO ........................................................ 65 dB (65.2 dBf input)
STEREO ..................................................... 60 dB (65.2 dBf input)

Stereo separation (1 kHz) ........................................................... 36 dB
Selectivity (DIN ±300 kHz) .......................................................... 64 dB
Frequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range ..................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz) .... 50 dB (60 dBµV EMF input)

GENERAL

Power consumption

For Europe ............................................................................ 330 W
Foe Australia ........................................................................ 300 W

Standby Power consumption .................................. Less than 2.0 W
AC outlet

SWITCHED .......................................................... total 90 W max.

Dimensions ..................................................... W : 440 mm (17-5/16")

H : 166 mm (6-9/16")
D : 396 mm (15-9/16")

Weight (Net)

For Europe ........................................................... 12.3 kg (27.1 lb)
For Australia ........................................................ 12.1 kg (26.6 lb)

05.7.16, 0:47 PM

64