Kenwood KRF-X9090D - Manual (Page 13)

13 EN
COAXIAL OPTICAL OPTICAL
VIDEO 3
OPTICAL
MONITOR CD/DVD
DIGITAL IN DIGITAL OUT
VIDEO
2
DVD/
6CH
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to this model, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
DIGITAL
OUT
(AUDIO)
DOLBY DIGITAL RF
OUT (AUDIO)
OPTICAL DIGITAL
OUT (AUDIO)
LD Player
PCM OUT
Setting up the system
RF digital demodulator
(Commercially available)
DVD Player or CD Player
Optical
fiber cable
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
OPTICAL DIGITAL
OUT (AUDIO)
Connect the video signal and
analog audio signals to the VIDEO
3 jacks.
(See “Connecting video compo-
nents”.)
@
To connect an LD player with a DIGITAL RF OUT, connect the LD player to an RF digital demodulator (Commercially available).
Next, connect the DIGITAL OUT jack of the demodulator to the DIGITAL IN jack of this model.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
COAXIAL DIGITAL
OUT (AUDIO)
Connect the video signal and
analog audio signals to the VIDEO
2 jacks.
(See “Connecting video compo-
nents”.)
@
Optical fiber cable
Optical
fiber cable
OPTICAL DIGITAL
IN (AUDIO)
MD Recorder
05.7.16, 10:30 AM 13