Kenwood XD-500 - Manual (Page 51)

XD-750/700/550/500 (En)
5 1
Preparation section
Basic
section
Application section
Knowledge sections
Timer operation
Adjust the clock before setting the timer.
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the power is switched off after one hour. This timer
operates only once directly after setting.
Sleep timer (SLEEP)
The power is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set
time period.
AI timer playback (PROG.1, PROG.2)
When timer playback starts, the volume increases gradually.
Operate easy To use Timer
(Operate easy To use Timer : O.T.T.)
Sleep timer
(SLEEP)
Set the number of minutes after which the power is to be turned OFF.
2Set the time.
Adjust the clock before setting the timer.
1Turn the power ON.
SLEEP
Lights
TUNED STEREO
AUTO SLEEP
ECHO
SLEEP EQ.
CLASSIC
MANUAL
POP ROCK
VOL.
SLEEP
s L E E P 9 )
EX . BASS
Duration for sleep timer
Timer playback can be set with a simple operation of just setting the time. With this function, the last source selected before
turning power off can be played by the timer. The power turned ON by the timer is switched off automatically in an hour after
the timer playback starts.
÷
The power is turned OFF automatically after the set time has elapsed.
÷
Each press decreases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
Turn the power OFF or press the SLEEP key until the sleep
time is cancelled.
To cancel
90
=80=70...30=20=10=Cancel=90=80...
A M 7 ) ) :
O.T.T.
1Select the desired source and adjust
the volume.
2Switch OFF the power supply.
3Press the MODE key.
The program timer does not operate until O.T.T. operation
has ended.
At the time of tape playback by timer operation, the B deck
has priority.
÷
The ON time can be set in steps of 5 minutes.
Blinks
ON time display
MODE
÷
When the MODE key is pressed, the input source will be displayed, and
after a few seconds, the ON time will be displayed.
4Set the ON time.
The time is
advanced.
5Press the ENTER key.
ENTER
Press the MODE key twice while the power is OFF.
To cancel
The time is
returned.
D
O W
N
UP UP MULTI CONTROL
/VOLUME