Kenwood XD-500 - Manual (Page 21)

XD-750/700/550/500 (En)
2 1
Preparation section
Basic section
Application section
Knowledge sections
ECHO
T A P E ) ) ) )
EX . BASS
EQ.
CLASSIC
MANUAL
POP ROCK
VOL.
REV.MODE B DOLBY NR DOLBY NR
RUNNING
INDICATOR
Selection of DOLBY NR
(Noise Reduction)
To stop playback
Selection of reverse mode.
To wind tape at high speed
÷ If the tape transport direction is opposite to the desired direction, press
the play key corresponding to this.
To fast wind in direction \
Transport direction indicators
The 2 and 3 indicators indicate the current direction in which
the tape advances when playback or recording is started auto-
matically by the easy operation function, etc. This direction is
the direction stored in memory when the tape was last stopped.
(To switch the tape transport direction, press the play key cor-
responding to the desired direction then press the stop (
7) key.)
The Dolby NR system minimizes the hiss noise heard when
playing tape. When playing a tape prerecorded with Dolby
NR ON, be sure to set the DOLBY NR ON for playback.
Please play back tapes recorded with equalizer etc. without
applying any effect.
Note Note
Let's put out some sound
3 ¡ 7 2 1
To fast wind in direction |
÷
Press the 7 key to stop fast winding.
Each press switches the modes as follows.
1 “ [”... Both sides are played back (recorded), and
then the tape stops.
2 “ ”” .. Both sides are played back endlessly.
(The tape stops after recording onto both
sides.)
3 “ “” .. Only one side is played back (recorded),
and then the tape stops.
REV. MODE
÷ Select the Dolby NR mode according to the recording condition of
the tape.
ECHO
T A P E ) ) ) )
EX . BASS
EQ.
CLASSIC
MANUAL
POP ROCK
VOL.
REV.MODE B DOLBY NR
RUNNING
INDICATOR
ECHO
T A P E ) ) ) )
EX . BASS
EQ.
CLASSIC
MANUAL
POP ROCK
VOL.
REV.MODE B DOLBY NR DOLBY NR
RUNNING
INDICATOR
DOLBY NR indication
Reverse mode indication
Transport direction indicators
÷ Normal (TYPE ), high (TYPE ), or metal (TYPE ) tape selection is
set automatically.
÷ Remove tape slack before loading.
÷
Close the door securely.
7
÷
Do not take out the cassette tape until the tape transport has
stopped completely.
Displays the selected deck.
Displayed when the deck is loaded with a tape.
Lit when “DOLBY NR” is ON.
DOLBY NR
ECHO
T A P E
EX . BASS
B DOLBY NR DOLBY NR
Each press switches the modes as follows.
1 “DOLBY NR” ON .......... DOLBY NR is used.
2 “DOLBY NR” OFF ......... DOLBY NR is not used.