Kenwood XD-500 - Manual (Page 50)

XD-750/700/550/500 (En)
5 0
Preparation section
Basic section
Application section
Knowledge sections
Clock adjustment
Enter the figure of minute.
Enter the figure of hour.
Activate the clock adjustment mode.
This unit incorporates a clock function. Be sure to adjust
the correct time before using the timer function.
The time is displayed only while the power is off.
÷ The time of the day is represented in 12-hour AM/PM method.
÷
Press the ENTER key. The hour is entered and the minute display starts
to blink.
Ensure that the power is OFF.
1
2
3
Example: Adjustment to 8:45
÷
The time display starts to blink.
÷ If you make a mistake, restart from the beginning.
÷
To adjust correct time, press the ENTER key at the same moment as
a time announcement.
÷ The time display blinks after a power failure or when the power cord has
been unplugged from the AC outlet and plugged again. In such a case,
adjust the clock again.
AUTO
1
1
2
ENTER
D O W
N
UP UP MULTI CONTROL
/VOLUME
To increase
the figure
2
ENTER
D O
W
N
UP UP MULTI CONTROL
/VOLUME
To increase
the figure
) A M 1 2 ) :
) A M 8 ) :
A M 8 4 5 :
Adjust the clock before setting the timer.
To decrease
the figure
To decrease
the figure