Kenwood XD-500 - Manual (Page 11)

XD-750/700/550/500 (En)
1 1
Preparation section
Basic section
Application section
Knowledge sections
Controls and indicators
Receiver
1ON/STANDBY ( ) key
^
Power ON/OFF switching is executed.
2RESET key Y
Press to reset the microcomputer built in the system.
3MIC MIX. knob o
At the time of mic mixing , this knob controls the volumes of the
microphones.
4MIC 1, MIC 2 terminal o
For connection of a microphone (optional).
5HIT MASTER key o
Used in karaoke singing, etc.
6BEST HITS key &r
When power is ON: Records the first tracks of all of the CDs
stored in the unit.
When power is STANDBY: Switches the auto power-save mode on
and off.
7EX. BASS (Extra bass) key &W
When power is ON: Switches the extra bass play on and
off.
When power is STANDBY: Used in the timer setting operation.
8DISPLAY @
9SRS 3D key/Indicator (XD-750/XD-700) iE
When power is ON: Switches the SRS 3D play on and off.
When power is STANDBY: Used in the timer setting operation.
SOURCE DIRECT key/Indicator (XD-550, XD-500)
iE
When power is ON: Press to turn the Source Direct play on
and off.
When power is STANDBY: Used in timer setting operations.
0DISP. /DEMO key y
When power is ON: Switches the displayed information.
Switches the demonstration on and
off.
When power is STANDBY: Switches the demonstration on and
off.
!ENTER key ∞ p
Used for time setting, timer setting, etc.
@MODE key tQ
When power is ON: This key switches the function of the
MULTI CONTROL/VOLUME knob.
The items which can be selected differ
according to the status at that time.
When power is STANDBY: This key is used in the OTT timer set-
ting.
#Equalizer operation keys yu
The equalizer effect is switched ON/OFF and the type of equalizer
effect is selected.
$MULTI CONTROL/VOLUME knob ^
Normally this is used for volume adjustment. Depending on the
purpose, the function can be switched with the MODE key.
%PHONES terminal &
For connection of a headphone (optional).
^INPUT key ^
Press to select the input source. When TAPE or CD is selected,
playback starts automatically provided that a tape or disc has already
been loaded.
&Tuner operation keys ¢
AUTO key
When power is ON:
Switches the tuning mode.
When power is STANDBY: Used in the clock adjustment.
TUNING keys
Press to select a radio station.
BAND key
Press to switch the receiving band.
Cassette deck unit
*A deck cassette holder
Press the area marked PUSH OPEN to load or eject a tape.
(O.T.E. key ‚
When this key is pressed during CD playback, only the title being
played at that time will be recorded on tape. When this key is pressed
during stop, the CD selected at that time will be recorded on tape
from the first title onward.
)DOLBY NR key ¡
Dolby noise reduction ON/OFF switching is executed.
¡REV. MODE key ¡
The reverse mode of the deck (both sides, repeated, one side) is
switched.
™REC/ARM key ¶
Press to start recording. Pressing the key during recording stops it
after leaving a non-recorded space (blank) of about 4 seconds.
£DUBBING key ª
The contents of the tape of the A deck are copied to the tape of the
B deck.
¢B deck cassette holder
Press the area marked PUSH OPEN to load or eject a tape.
∞
Cassette deck operation keys
Play ( 2 3) keys
Stop ( 7) key
Fast forward and rewind ( 1 ¡) keys
§A/B key )•
Press to select the deck to be operated. Used as the beat cancel key
during recording of AM broadcasting.
CD player unit
¶DISC SELECTOR key (
The disc for playback (or recording) is selected.
•TIME DISP. (Time display) key *
Press to switch the CD time display information.
ªDisc tray *
Three discs can be stored.
ºOPEN/CLOSE (0) key *
The disc tray is opened and closed.
⁄DISC SKIP key (
The disc for playback (or recording) is selected. This is also used for
insertion of a CD to the inside of the disc tray.
¤CD operation keys *
Play/pause ( 6) key
Stop ( 7) key
Skip ( 4 ¢) keys