Beat cancel function, Points in cd recording – Kenwood XD-500 User Manual
Page 28
XD-750/700/550/500 (En)
2 8
Preparation section
Basic section
Application section
Knowledge sections
Beat cancel function
There may be cases in which beat noise interferes with record-
ing of MW/LW broadcasting.
In such a case, press the A/B key during recording to reduce or
suppress the beat noise. The A/B key acts as the demonstration
key except during tuner recording.
Let's record
Points in CD recording
When recording CD tracks onto a tape, if you leave the cassette
deck in record-pause mode beforehand, the cassette deck re-
cording can be started at the same time as the CD starts to be
played. (Synchro recording function)
1Put the CD player in pause mode.
2Select the track to be recorded with the skip (4, ¢)
keys.
(The CD player pauses at the beginning of the selected
track.)
3Put the cassette deck in Record-pause mode.
4Start playing the CD.
(Synchro recording starts)
A/B
÷
Recording stops when the play key of the CD player is pressed.