9 paper size detection control, Paper size detection control -8 – Konica Minolta 5430 DL 5440 DL 5450 User Manual
Page 175
Operations
Lower Feeder Unit Theory of Operation
2-8
II Comp
osition
/O
p
eration
3.1.9
Paper size detection control
• The Lower Feeder Paper Size Switch (S1 PF) detects the length size (FD) of the paper.
1.
The Size Detection Board turns as the Trailing Edge Guide Plate is moved.
2.
When the tray is slid into the machine, the Size Detection Board pushes the actuator of
the Lower Feeder Paper Size Switch (S1 PF) installed to the machine frame, thus turn-
ing ON the switch.
3.
The combination of ON/OFF positions of the sub-switches of the Lower Feeder Paper
Size Switch (S1 PF) determines the specific paper size that can be either one of the
seven different sizes.
4.
If the tray is not slid into position, all of the sub-switches are OFF and the message
“DRAWER OPEN TRAY X” appears.
Lower Feeder Paper Size Switch
Paper size
SW1
SW2
SW3
OFF
ON
ON
Legal (8.5”
× 14”)
ON
ON
ON
Government Legal Letter Plus
ON
ON
OFF
A4
ON
OFF
OFF
Letter (8.5”
× 11”)
OFF
OFF
ON
B5
ON
OFF
ON
Executive
OFF
OFF
OFF
Lower Feeder Unit not installed
4138to2122c0
Lower Feeder Paper Size Switch (S1 PF)
Size Detection Board
Actuator
Trailing Edge Guide Plate
5430DL_5440DL_5450_TO_PDF.book 8 ページ ２００５年４月１２日 火曜日 午後４時４９分