Konica Minolta 5430 DL 5440 DL 5450 - Manual (Page 16)

SAFETY AND IMPORTANT WARNING ITEMS
S-15
5.3 Laser Caution Label
• A laser caution label is attached to the inside of the machine as shown below.
5.4 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
• When laser protective goggles are to be used, select ones with a lens conforming to the
above specifications.
• When a disassembly job needs to be performed in the laser beam path, such as when
working around the printerhead and PC Drum, be sure first to turn the printer OFF.
• If the job requires that the printer be left ON, take off your watch and ring and wear laser
protective goggles.
• A highly reflective tool can be dangerous if it is brought into the laser beam path. Use
utmost care when handling tools on the user’s premises.
• The Print Head are not to be disassembled or adjusted in the field. Replace the Unit or
Assembly including the Control Board. Therefore, remove the Laser Diode, and do not
perform Control Board trimmer adjustment.
4138safe001c0
5430DL_5440DL_5450_TO_PDF.book 15 ページ ２００５年４月１２日 火曜日 午後４時４９分