Konica Minolta 5430 DL 5440 DL 5450 - Manual (Page 115)

Media Feed Section (magicolor 5440 DL/5450) Main Unit Theory of Operation
2-78
II Comp
osition
/O
p
eration
13.3.8 Tray detection control
• Detects the Tray presence with the Paper size switch (S5).
1.
Setting the Tray to the printer will make the detecting plate press and turn ON the actu-
ator for the Paper size switch (S5) mounted on the Copier frame.
2. The switch will be OFF if the Tray is not properly set, and “TRAY1 DRAWER OPEN
(magicolor 5440 DL)” or “PAPER EMPTY TRAY2 (magicolor 5450)” will be displayed.
13.3.9 Media misfeed detection control
• If the Synchronizing Roller Sensor (PC4) is not activated within a predetermined period
of time after a paper feed sequence has been started, the machine determines that there
is a media misfeed. It then gives the message “MEDIA JAM TRAY1 (magicolor 5440 DL)”
or “PAPER JAM TRAY2 (magicolor 5450)” on the panel.
• The media misfeed display can be reset by opening and closing any of the doors.
4138to2615c0
Paper Size Switch (S5)
Actuator
Tray Detection Plate
4138to2616c0
Tray Detection
Plate
5430DL_5440DL_5450_TO_PDF.book 78 ページ ２００５年４月１２日 火曜日 午後４時４９分