Upgrading your software and firmware, Additional care and maintenance – Kodak EasyShare Series 3 User Manual
Page 57
Appendix
www.kodak.com/go/support
51
■
Replace all batteries of a set at the same time. Do not mix new batteries with used
ones. Do not mix rechargeable and non-rechargeable batteries. Do not mix lithium,
Ni-MH, and Ni-Cd batteries together. Do not mix batteries of different chemistry
types, grades, or brands. Failure to observe this precaution may cause leakage.
■
Remove batteries when the product is stored for an extended period of time. In the
unlikely event that battery fluid leaks inside the product, contact your local Kodak
Customer Service representative.
■
In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak Customer Service representative.
■
Dispose of batteries according to local and national regulations.
■
If the battery contacts touch metal objects, the battery may short-circuit, discharge
energy, become hot, or leak.
■
Do not charge non-rechargeable batteries.
For more information on batteries, see
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the printer dock firmware (the software that runs on the printer
dock). Visit
Additional care and maintenance
■
Do not allow chemicals, such as suntan lotion, to come into contact with the
painted surface of the printer dock.
■
If the printer dock has been subjected to inclement weather or you suspect water
has gotten inside the printer dock, turn off the printer dock and remove the paper
tray and color cartridge. Allow all components to air-dry for at least 24 hours
before using the printer dock again. If this does not resolve the problem, contact
customer support (see