Setting the picture quality, Tagging pictures for printing – Kodak EasyShare Series 3 User Manual
Page 18
12
www.kodak.com/go/support
Setting up your digital camera
Setting the picture quality
Before taking pictures, change the picture quality
setting (or resolution) on your digital camera to
3:2
. This ensures that the pictures you
take are proportional to the printer dock paper,
preventing unwanted cropping of your pictures.
See your camera user’s guide for more information.
Tagging pictures for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging
pictures on other brands of ImageLink system compatible cameras, see the camera user’s guide.
1 Press the Share button.
2 Press
to locate a picture.
3 Make sure Print
is highlighted (to tag all pictures in the current image storage
location, highlight Print All
), then press the OK button.
4 Press
to select the number of copies (0 - 99). The default is one. Zero
removes the tag for a selected picture.
The Print icon
is displayed in the status area.
■
To apply a print quantity to other pictures, press
to locate them. Keep
the print quantity as is, or press
to change it.
5 Press the OK button.
6 Press the Share button to exit.
NOTE: To remove print tagging from all pictures: from the Share menu, highlight Cancel Prints
, then
press the OK button.
To print tagged pictures from your digital camera, see
. To print tagged
pictures from your computer, see