Printing from a kodak card reader – Kodak EasyShare Series 3 User Manual
Page 20
14
www.kodak.com/go/support
Printing without a computer
Printing from a Kodak card reader
The Kodak EasyShare printer dock series 3 is compatible with the Kodak 8-in-1 card
reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card
readers may work with the printer dock; however, other manufacturers’ card readers
are not supported.
1 For best results, tag pictures on your memory card for printing (see
or your
camera user’s guide). If you do not tag pictures on your memory card, you will
have the option of printing only the most recent picture on the card.
2 Plug the USB connector from the card reader into
the USB connector located on the side of the printer
dock.
NOTE: If the card reader is already plugged in but the connection is
no longer available, disconnect then reconnect the USB cable
to re-establish the connection.
3 Insert the memory card into the card reader (see
your card reader user’s guide for details). Do not
insert more than one card at a time.
4 Press
to begin printing, or press
to cancel.
Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or
visit