Kodak EasyShare Series 3 - Manual (Page 10)

4 www.kodak.com/go/support
Getting started
Installing and removing the color cartridge
1 Open the cartridge door on the side of the printer dock.
2 Check to make sure there is no slack in the color
cartridge ribbon.
To remove slack, push in on the cartridge spool,
then rotate the spool clockwise.
IMPORTANT: Be careful not to rotate the spool more
than necessary. Doing so could reduce the
number of prints you are able to make.
3 Slide the color cartridge in, label side up, with the
arrow pointing toward the printer dock. Push the
cartridge until it "clicks" into place.
4 Close the cartridge door.
IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not
attempt to remove the cartridge without first clearing the paper error. Make
sure the Paper light is off before attempting to remove the cartridge (see
Paper light under
Printer dock status lights, page 41 ).
To remove the color cartridge, open the color
cartridge door, then push up on the green lever and
slide the cartridge out.