Kodak EasyShare Series 3 - Manual (Page 39)

www.kodak.com/go/support 33
7
Troubleshooting
When you have questions about your printer dock, start here. Additional technical
information is available in the ReadMe file located on the Kodak EasyShare software
CD. For updates to Troubleshooting information, visit
www.kodak.com/go/printerdocks .
Printing problems
If... Try the following
Paper does not
feed
(Paper light may
glow steady
amber) IMPORTANT: Use only Kodak color cartridge & paper kits for your
printer dock. Do not use inkjet paper.
■ The paper tray may be empty. Load paper ( page 6 ), re-install the paper
tray, then press .
■ Check the paper:
1 Remove the paper tray ( page 7 ).
2 Inspect the paper supply: make sure paper is not damaged in any
way, or removable tabs have not been detached. Replace with new
paper if necessary.
3 Carefully "fan" the paper to keep the sheets from sticking together.
4 Reload the paper tray. Do not exceed the fill line.
5 Re-install the paper tray, then press to resume printing.
■ Clean the paper feed roller ( page 31 ).
Multiple sheets
of paper are
pulled through
printer
1 Remove the paper tray ( page 7 ).
2 Remove the paper supply from the paper tray. Carefully "fan" the paper
to keep the sheets from sticking together.
3 Reload the paper tray. Do not exceed the fill line.
4 Re-install the paper tray, then press to resume printing.