Kodak EasyShare Series 3 - Manual (Page 16)

10 www.kodak.com/go/support
Setting up your digital camera
Docking and charging your digital camera
Docking your digital camera lets you make prints directly from the camera, transfer
pictures from the camera to the computer, and charge the camera battery.
The Kodak EasyShare printer dock series 3 is ImageLink print system compatible. So in
addition to docking Kodak EasyShare digital cameras, you can dock other brands of
ImageLink system compatible digital cameras.
1 Make sure a custom camera insert is installed on the printer dock (see page 2 ),
and a dock-rechargeable battery is installed in the camera (see page 8 ).
2 Place the camera on the printer dock. Push down to
seat the connector.
Keep the camera wrist or neck strap clear of the
paper path to the front and rear of the printer dock.
The camera is now powered by the printer dock
instead of the camera battery.
■ The Kodak EasyShare Ni-MH rechargeable battery
pack and the Kodak EasyShare Li-Ion rechargeable
battery charge up to 3 hours.
■ The Battery charging lights turn on as charging
progresses. Charging is complete when all three
lights are lit.
■ You may leave the camera on the printer dock to
maintain the charge.
For battery information for other brands of
ImageLink system compatible cameras, see the
camera user’s guide.