Kenwood 50 MHZ ALL MODE TRANSCEIVER TS-590S User Manual
Ts-590s
This manual is related to the following products:
Table of contents
Document Outline
- RECEPTION
- TRANSMISSION
- LOCAL OSCILLATOR
- DSP
- SOFTWARE: ENHANCING OPERATING PLEASURE
- 5.1 Extended Data-mode Related Functions
- 5.2 Drive Out
- 5.3 Single Button Toggles IF Filters between A and B
- 5.4 Double Function Keys and Hold Time Selection
- 5.5 Mode Selection of Built-in Electronic Keyer
- 5.6 Switchover of Shift Frequency Interlocked with Change of Pitch Frequency
- 5.7 Power-on Message
- 5.8 Quick Memory Function
- 5.9 Cross Tone Function
- 5.10 PF Keys
- 5.11 Expansion of Voice Guide Function (Optional VGS-1 Required)
- 5.12 Easy Updating of Firmware
- APPEARANCE DESIGN: “DESIGN CONCEPT” REVEALED BY DESIGNING ENGINEER
- STRUCTURAL FEATURES
- EXPANSIVE APPLICATION SOFTWARE
- 8.1 Windows Related Software
- 8.2 System Configurations
- 8.2.1 Controlling TS-590S from a PC using the COM Connector
- 8.2.2 Controlling TS-590S from a PC using the USB Connector
- 8.2.3 Controlling TS-590S from a PC using the COM and ACC2 connectors (microphone and speaker connected to the PC to be used)
- 8.2.4 Controlling TS-590S from a PC using the USB connector (microphone and speaker connected to the PC to be used)
- 8.2.5 Controlling TS-590S from a PC on a Remote Site
- 8.3 New ARCP-590 (Amateur Radio Control Program for TS-590S) Freeware
- 8.4 ARHP-590 (Amateur Radio Host Program) Freeware
- 8.5 New ARUA-10 (USB Audio Controller) Freeware
- 8.6 New ARVP-10H (Amateur Radio VoIP Program) Freeware
- 8.7 New Virtual COM Port Driver
- OPTIONAL ACCESSORY