1 basic functions, 2 setup of arvp-10h (host station), 3 making arvp-10h (host station) online or offline – Kenwood 50 MHZ ALL MODE TRANSCEIVER TS-590S User Manual
Page 70: Basic functions, Setup of arvp-10h (host station), Making arvp-10h (host station) online or offline
8 EXPANSIVE APPLICATION SOFTWARE
64
TS-590S
ARVP-10H and ARVP-10R enable a voice signal to be sent and received over LAN or the Internet.
Configure the necessary settings to use ARVP-10H.
Select “User Settings” from the File pulldown menu and click the “Add...” button in the User Settings
dialog box and the Setup User dialog box will appear, In Setup User dialog box, you can set the user
name and password.
Figure 8-14 Setup User Dialog Box (ARVP-10H)
To disable the user temporarily, click on the User is disabled checkbox.
To deny a connection request from all users temporarily, click on the Reject connection request
checkbox in the main window.
To place ARVP-10H online, after above setting is complete, click the “Online” button in the main
window.
To take ARVP-10H offline, click the “Offline” button in the main window.
8.6.1 Basic Functions
8.6.2 Setup of ARVP-10H (Host Station)
8.6.3 Making ARVP-10H (host station) Online or Offline