Kenwood 50 MHZ ALL MODE TRANSCEIVER TS-590S - Manual (Page 60)

8 EXPANSIVE APPLICATION SOFTWARE
54 CONTENTS TS-590S
Caution: When the USB connector is used for input/output of the audio signal on the host station, ARUA-10 is not required
neither.
ARCP-590 (Amateur Radio Control Program for TS-590S) is software enabling control of the TS-590S
from a PC.
Figure 8-1 Main Window of ARCP-590
ARCP-590 is available free and can be downloaded from Kenwood’s website.
URLs from which ARCP-590 can be downloaded:
http://www.kenwood.com/i/products/info/amateur/software_download.html
As with ARCP-480 for the TS-480S, the new ARCP-590 program is designed to control virtually all of
the functions on the TS-590S transceiver.
8.2.5 Controlling TS-590S from a PC on a Remote Site
Remote Station (PC that remotely
controls the transceiver)
Type of
Connection
Host station (PC that is located
near the TS-590S)
Software Hardware Software Hardware
Control signal ARCP-590 -
Network
ARHP-590
* Connected to
the COM or USB
connector
Audio signal
ARVP-10R or
generic VoIP
software
The microphone
and speaker
connected to a
PC
ARVP-10H or
generic VoIP
software * Connected to
the ACC2 or USB
connector
8.3 New ARCP-590 (Amateur Radio Control Program for
TS-590S) Freeware