Kodak EASTMAN 3.2S - Manual (Page 14)

Printer Overview
8 www.kodak.com/go/aiosupport
Configuring printer settings
To set or change basic printer settings:
1. Press .
2. Press , then touch Printer Settings.
3. Touch the following settings:
• Date and Time
– Touch Year, Month, Day, Hour, or Minute to change the individual settings.
Touch when you are done.
NOTE: You can also synchronize the printer date and time to your computer using
Home Center Software.
• Button Sounds
– Touch On or Off to set.
• Time to Low Power
To conserve energy, your printer will enter a low power (sleep) mode after
being idle for a default delay time of 1 hour. You can increase the delay time to
low power. Increasing the delay time may result in reduced energy savings.
– Touch the time to low power (select from 1 to 4 hours in 0.5 hour
increments). After the time to low power, the printer enters a low-power
(sleep) mode.
• Tagged Images Printing (see Printing tagged pictures, page 57 )
– Touch On or Off to set.
• Language
– Touch or to scroll through the languages, then touch a selection.
• Country/Region
– Touch or to scroll through the countries, then touch a selection.
• Reset All Settings (see Resetting factory defaults, page 100 )
NOTE: Resetting factory defaults does not change the date and time,
language, country/region, or network settings.
• Printer Info
– Touch to display the version of firmware currently running on the printer.
Press OK when you are done.
4. Press to return to the Home Screen.