Kodak XLS 8400 - Manual (Page 75)

Windows NT 3.51Workstations and Servers
9-8 Part No. 1H9613 June 1997
Direct Printing
LPR Port (TCP/IP) Configuration
Do the procedure on Page 10-2 to install the software for the
Network Interface Card.
Do the following steps to set up a system to print directly to a
printer using TCP/IP:
1. From the Create a Printer window, select “Other” from the
Print to drop-down list box.
The Print Destinations window opens.
2. Select “LPR Port.” If LPR Port is not in the menu, select
“Other” again; and install Microsoft TCP/IP Printing Services.
The Add LPR compatible printer dialog box opens.
3. In the Add LPR Compatible Printer dialog box, enter the
following information:
• Name or Address of host providing LPD—Enter the IP
Address that has been assigned to the Kodak printer.
NOTE: An IP address entered as 123.123.012.012 from the
printer’s front control/display panel MUST be entered in
this menu as 123.123.12.12 Refer to “Network Printer
Parameters” for more information.