Kodak XLS 8400 - Manual (Page 111)

Printing
13-2 Part No. 1H9613 June 1997
Changing between PostScript and Raster Printing Modes
NOTE: If you are setting up a Kodak Digital Science™ Desktop
Color Proofer 9000, you may wish to refer to the user’s
guide for the Network Interface card shipped with the
proofer for instructions on using the display/control panel
1. Press Setup/Select on the display panel when “READY”
appears in the panel.
2. Press until “SETUP:MODE” appears.
3. Press Setup/Select to access the SETUP:MODE submenu.
4. Press until “MODE:POSTSCRIPT” or
“MODE:RASTER” appears.
The currently selected version is indicated by an asterisk (*).
5. Press Setup/Select to make your choice.
6. Press until “MODE:EXIT” appears.
7. Press Setup/Select.
8. Press until “SETUP:EXIT” appears.
9. Press Setup/Select.
If you change the print mode, wait for the printer to reinitialize and
return to “READY.”
Power
Error
Cancel Print
Setup/Select scroll
” “
” “
” “
” “