Kodak XLS 8400 User Manual
Page 54
Part No. 1H9613
June 1997
7-3
Windows 3.x Workstations
2.
Set up a PC-NFS server as described in the PC-NFS
installation guide. Make sure that the server runs the PC-NFS
daemon rpc.pcnfsd.
3.
Set up a printer on the PC-NFS server as described in the
sections in this guide on UNIX systems.
4.
Edit the server’s /etc/exports file and add the print spool
directory to the list of directories being exported to the PCs
running PC-NFS.
Make sure that the PCs have read and write access to this
directory. If the spool directory is not exported, PC-NFS will
not mount the printer.
5.
Update the list of exported directories using the command:
exportfs -a
6.
Mount this printer using either the nfsconf program or the
following command:
NOTE: Enter the command on one line without returns.
net use
option]...]
NOTE: The print device can be either lpt1, lpt2, or lpt3. The host
is the server name, and the printername is the name
assigned to the printer.
7.
Use the net printers command to see a list of printers:
attached to the server.
net printers
8.
Select raw mode of data transfer while mounting a printer in
PC-NFS for printing PostScript files.
Eliminating Extra/Error Pages
Refer to “Printing” for more information on how to print from DOS
and Windows applications. This section also discusses
elimination of extra/error pages that may occur when printing
from TCP/IP.