4. power supply, 4-1. voltage and power requirements, 4-2. power cord – Sony HDW-2000 User Manual

Page 8

1-2

HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P

MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP

1-4-2. Power Cord

This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.

w
Use the specified power cord only when connecting the
AC power. Never use a injured power cord.

For customers in the U.S.A. and Canada:
1 Power cord 125 V 10 A (2.4 m):

! 1-557-377-11

2 Plug holder (Brown):

3-613-640-01

For customers in the United Kingdom:
1 Power cord 250 V 10 A (2.0 m):

! 1-777-823-12

2 Plug holder (Brown):

3-613-640-01

For customers in European countries except the United
Kingdom:
1 Power cord 250 V 10 A (2.0 m):

! 1-551-631-22

2 Plug holder (Brown):

3-613-640-01

For customers in the China:
1 Power cord 250 V 10 A (1.8 m):

! 1-783-481-12

2 Plug holder (Brown):

3-613-640-01

If the unit is used in the area except above, please contact
your local Sony Sales Office/Service Center.

1-4. Power Supply

1-4. Power Supply

1-4-1. Voltage and Power Requirements

This unit’s power line has a switching regulator.
c
Be sure to operate the unit within the range of following
power voltage.

Power voltage:

AC 100 to 240 V

±10 %

Power frequency:

50 Hz or 60 Hz

Power consumption: Maximum 240 W

(With all of the presumed optional kits.)

Rush current:

Model

Power Voltage
100 V IN

240 V IN

HDW-2000

20 A

40 A

Other HDWs

14 A

50 A

DVWs, MSWs

20 A

54 A

n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.

AC inlet