Appendix a setting check sheet – Sony HDW-2000 User Manual
Page 39

A-1
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
It is recommended to copy these check sheets and write down the setup conditions (switch and so on)
under the application.
If the setting is changed temporarily by changing operating condition, the setting can be reset easily.
It is recommended to attach the sheets to the unit when check, maintenance and repair.
If the unit is used frequently by changing the combination of each system, making the sheets are conve-
nient.
(Make use of the check sheets in prevention of setting error.)
Model name:
Serial No.: _____________________________
. Firmware
SY ROM version:
____________________________
SV ROM version:
____________________________
VN ROM version:
____________________________ (MSW-M2000E/M2000EP/M2100E/M2100EP)
. RS-232C baud rate:
bps
. Hours meter
Write down the value of hours meter when checking, servicing, and maintaining.
ITEM
Date
Hours meter
H01: OPERATION HOURS
/
H02: DRUM RUNNING HOURS
/
H03: TAPE RUNNING HOURS
/
H04: THREADING COUNTER
/
H12: DRUM RUNNING HOURS (Resettable)
/
H13: TAPE RUNNING HOURS (Resettable)
/
H14: THREADING COUNTER (Resettable)
/
n
The current settings of setup menu can be saved and read using a Memory Stick or a memory card.
(Not available in MSW-A2000/A2000P with SY ROM version 1.09 or earlier.)
For details, refer to the maintenance manual volume 1.
Appendix A
Setting Check Sheet