Sony HDW-2000 - Manual (Page 17)

1-11
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
1-8. Signal Inputs and Outputs
Remote connectors
4 REMOTE 2 PARALLEL I/O (50P) *** D-SUB 50P connector
4 REMOTE1-IN (9P) D-SUB 9P connector (RS-422A interface), Remote control
4 REMOTE1-OUT (9P) D-SUB 9P connector (RS-422A interface), Remote control
4 RS-232C D-SUB 9P connector (RS-232C interface) for ISR (Interactive Status Reporting)
4 CONTROL PANEL 10P connector for an outside control panel connection only
4 VIDEO CONTROL (15P) D-SUB 15P connector for a TBC remote controller (BVR-50) exclusive connection
4 VIDEO CONTROL (9P) *3 D-SUB 9P connector for a TBC remote controller (HKDV-900) connection
4 (OPTION) *4, 5 D-SUB 9P connector for an optional kit
*** : Refer to Optional “Interface manual” for details.
Output connectors
1 AUDIO OUTPUT XLR 3-pin x 4 (1 set : CH1, CH2, CH3, and CH4)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
1 CUE OUT XLR 3-pin x 4 (1 set : CH1, CH2, CH3, and CH4)
(Excl. MSW-2000/A2000/A2000P) Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
1 TIME CODE OUT XLR 3-pin x 1
Time code 2.2 V p-p, low impedance, balanced
1 MONITOR OUTPUT XLR 3-pin x 2 (1 set : L and R)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
2 VIDEO OUTPUT, COMPOSITE BNC x 3 (including 1 for character superimpose)
Analog composite video 1.0 V p-p, 75 Z, sync negative
2 VIDEO OUTPUT, COMPONENT BNC x 3 (1 set : Y, R-Y, and B-Y)
Analog component video
Y : 1.0 V p-p, 75 Z, sync negative
R-Y/B-Y : 0.7 V p-p, 75 Z
3 AUDIO OUTPUT (AES/EBU) BNC x 4 (1 set : CH1/2, CH3/4, CH5/6, and CH7/8) or
BNC x 2 (1 set : CH1/2, CH3/4)
Digital audio
AES/EBU format, complies with AES-3id-1995
5 HD SDI OUTPUT *3 BNC x 3 (including 1 for character superimpose)
Serial digital interface (270 Mbit/s), complies with SMPTE 292
5 SDI OUTPUT BNC x 3 (including 1 for character superimpose)
Serial digital interface (270 Mbit/s), complies with SMPTE 259M & ITU-R BT.656
5 SDTI-CP OUTPUT *5 BNC x 2
Serial data transport interface (270 Mbit/s), complies with SMPTE 326M (SDTI-CP)
5 SDTI OUTPUT (OPTION) *3 BNC x 2
Serial data transport interface (270 Mbit/s), complies with SMPTE 305M (SDTI)
PHONE JM-60 stereo phone jack
(Upper control panel) Analog audio
up to _12 dBu (8 Z load), unbalanced
Input/Output connector
5 Ethernet *6 RJ-45 modular jack (with LED)
1000BASE-T (compliant with IEEE802.3ab)
100BASE-TX (compliant with IEEE802.3u)
10BASE-T (compliant with IEEE802.3i)
(Automatically detected by Auto-Negotiation)