Sam4s ER-390M - Manual (Page 160)

152 • Program Mode Programming ER-390M
Group Programming
20 Group totals are available to accumulate totals of individual PLUs that are assigned to each group. Each
PLU can be assigned to one, two or three different groups.
• Use program 900 to assign a group status, i.e. a group can be set to not add to the
total of all groups, or a group can be used to designate like items for kitchen
printer assignment.
• Use program 910 to assign a unique descriptor for each group, so that the group
may be easily understood on the group report.
Programming Group Status - Program 900
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0 0, press the SBTL key.
0 SBTL 0 9
3. Enter the number of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
Address OPTION VALUE = SUM
Group total is added to the total of all
groups on the Group report? Yes = 0
No = 1
N1
Send to kitchen printer? Yes = 2
No = 0
No Choice
KP PORT#: R (print a kitchen requisition)
KP PORT#: 1
N2
KP PORT#: 2
0
1
2
4
N3 Print RED on KP? Yes = 1
No = 0
N2 SBTL N1 N3
5. To program additional groups, repeat from step 3, or press the CASH key to
finalize the program.
CASH