Sam4s ER-390M - Manual (Page 155)

ER-390M Program Mode Programming • 147
Program 801 - Drawer Assignment & Training Clerk
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 1, press the SBTL key.
1 SBTL 0 8
3. Enter the number of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
Address OPTION VALUE = SUM
N1 Drawer assignment
(0: default drawer, 1: no drawer) 0-1
N2 Train Clerk Yes=1
No=0
N2 SBTL N1
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key
to finalize the program.
CASH