Sam4s ER-390M - Manual (Page 104)

96 • Program Mode Programming ER-390M
Program 300 – PLU Description Programming
Program descriptors by referring to the Alpha Overlay.
5. Turn the control lock to the P position
6. To begin the program, enter 3 0 0, press the SBTL key.
0 SBTL 0 3
3. Select the PLU you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Enter up to 14 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
7. If you are programming
X/TIME
Enter up to 18
characters from
Alpha Overlay
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH