Sony PDW-V1 User Manual
Page 74
Cha
p
te
r 7
Men
u
s
74
7-3 Extended Menu
In 525(u)-line
mode
12 ... 19
LINE 12 ... LINE 19
Specify blanking for lines 12 to 19.
blnk: Carry out blanking.
thru: Switch off blanking.
20
LINE 20
Specify blanking for line 20.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
In 525(J)-line
mode
12 ... 20
LINE 12 ... LINE 20
Specify blanking for lines 12 to 20.
blnk: Carry out blanking.
thru: Switch off blanking.
21
LINE 21
Specify blanking for line 21.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
In 625-line
mode
9 ... 22
LINE 9, 322 ... LINE
22, 335
Specify blanking for lines 9, 322 to 22, 335.
blnk: Carry out blanking.
thru: Switch off blanking.
23
LINE 23
Specify blanking for line 23.
half: Carry out half-blanking.
thru: Switch off blanking.
705
EDGE SUBCARRIER REDUCER
MODE
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off: Do not enable.
When playing back a composite signal, set this to “on.”
707
FORCED VERTICAL
INTERPOLATION OFF
The “Y-add” function is normally switched on automatically during jog or
variable speed playback. This item selects whether or not to force the “Y-
add” function off.
auto: Automatically switch the “Y-add” function on.
off: Force the “Y-add” function off.
The “Y-add” function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of reducing
the vertical movement of the playback picture.
713
VIDEO SETUP REFERENCE
OUTPUT LEVEL
Select whether to add the setup (7.5%) to the output analog video signals
(when 525(U) or 525(J)-line mode is selected).
0.0%: Do not add.
7.5%: Add.
The default settings for each line mode are as follows:
525(U)-line mode: 7.5%
525(J)-line mode: 0.0%
715
VIDEO GAIN CONTROL
Adjust the video output level.
–512 to 0 to 511
716
CHROMA GAIN CONTROL
Adjust the chroma output level.
–512 to 0 to 511
717
CHROMA PHASE CONTROL
Adjust the chroma phase.
–128 to 0 to 127
718
SETUP LEVEL (525(U)/525(J)-line
modes)/BLACK LEVEL (625-line
mode)
Adjust the setup level (black level).
–512 to 0 to 511
Menu items in the 700s, relating to video control
Item number Item name
Settings