Sony PDW-V1 User Manual

Page 73

Chap

r 7

Men

7-3 Extended Menu

Menu items in the 600s, relating to the time code reader, metadata, and UMID

Item number Item name

Settings

601

VITC POSITION SEL-1

Select a line into which to insert VITC signals for DVCAM playback
signals.

12H ... 16H ... 20H (in 525(U)/525(J)-line modes)
9H ... 19H ... 22H (in 625-line mode)

Note

You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.

a) In the DVCAM format, VITC is recorded as VAUX (Video Auxiliary) data.

Because VITC is inserted into video signals by the VITC generator only during
playback, the insertion line can be specified only for playback.

602

VITC POSITION SEL-2

Select a line into which to insert VITC signals for DVCAM playback
signals.

12H ... 18H ... 20H (in 525(U)/525(J)-line modes)
9H ... 21H ... 22H (in 625-line mode)

Note

You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.

a) In the DVCAM format, VITC is recorded as VAUX (Video Auxiliary) data.

Because VITC is inserted into video signals by the VITC generator only during
playback, the insertion line can be specified only for playback.

628

DF MODE

Select either drop-frame mode or non-drop frame mode for the counter
(when 525(U) or 525(J)-line mode is selected).
on (df): Drop-frame mode
off (ndf): Non-drop frame mode

651

UMID SDI OUTPUT

Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on: Output.

See 7-3-3 “Using UMID Data” (page 77) for more information about
UMID.

652

UMID SDI VANC LINE

Select the line in which UMID is output when menu item 651 is set to “on.”
12H, 13H, 15H, 16H, 17H, 18H, 19H (525(U)/525(J)-line modes)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (625-line mode)

See 7-3-3 “Using UMID Data” (page 77) for more information about
UMID.

657

ESSENCE MARK SDI OUTPUT

Select whether to output essence marks in the SDI output VANC.

off: Do not output.
on: Output.

660

ESSENCE MARK SDI VANC LINE

When item 657 is set to “on,” select the line to which to output essence

marks.
12H, 13H, 15H, 16H, 17H, 18H, 19H (525(U)/525(J)-line modes)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (625-line mode)

Menu items in the 700s, relating to video control

Item number Item name

Settings

703

BLANK LINE SELECT

Switch blanking of the video output signal on or off for individual lines in the
vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.

Sub-item

ALL LINE

- - -: Specify the blanking for each line separately.
blnk: Regardless of the setting of other sub-items, blank all lines which

can be specified in this menu item.

thru: Regardless of the setting of other sub-items, switch off blanking for

all lines which can be specified in this menu item.