Sony PDW-V1 - Manual (Page 34)

Cha
p
te
r 3
Pre
par
at
ion
s
34
3-4 Setting the Date and Time / 3-5 Superimposed Text Information
3-4 Setting the Date and
Time
When using this unit for the first time, you should set the
date and time as follows.
1
Holding down the SHIFT button, press the MENU
button.
The system menu appears on the monitor screen.
2
Select “DATE/TIME PRESET” using the F button or
f button, then press the g button.
The date and time setting screen appears on the
monitor, allowing you to set the following items.
• YEAR: Calendar year
• MONTH: Month
• DAY: Day
• TIME: Time
• TIME ZONE: Time zone (Difference from UTC)
3
Set the date, time and time zone.
You can change the setting of the flashing digits.
To change the flashing digits
Use the arrow buttons (
G, g).
To increase or decrease the values of the flashing
digits
Use the arrow buttons (
F, f) or jog dial.
4
Press the SET button.
The date, time and time zone settings are stored.
To return to the previous menu page
Press the MENU button.
To exit the menu
Press the MENU button twice in succession.
3-5 Superimposed Text
Information
The time code, menu settings, alarm messages, or other
text information can be superimposed on the video signal
output from the VIDEO OUT connector or SDI OUT
connector. The setting as to whether or not to superimpose
text infomration alternates every time you press the
CHARACTER button (see page 26).
Adjusting the text display
You can adjust the position, size and type of the
superimposed text using basic menu items 002, 003, 005,
009, 011, and 012.
For details, see 7-2-2 “Basic Menu Operations” (page
69).
Information displayed
a Type of time data
ACCESS
L
R
NETWORK
LOCAL
REMOTE
AUDIO MONITOR
CH-1 CH-2 CH-3 CH-4 CH-5 CH-6 CH-7 CH-8
SHUTTLE JOG
THUMBNAIL
ESSENCE
MARK
MARK1
MARK2
IN OUT
MENU
S.SEL
SET RESET SHIFT
TOP F REV F FWD END
PREV NEXT PLAY STOP
CLIP
MENU
SYSTEM
MENU
SUBCLIP
3 2,3 4
1
Display Meaning
CNT Counter data
TCR TC reader time code data
UBR TC reader user bits data
IN IN point time data
OUT OUT point time data
DUR Duration between IN point and OUT
point
T C R 0 0 : 0 4 . 4 7 . 0 7 *
P L A Y L O C K
4 Operation mode
1 Type of time data
2 Time code reader drop frame
mark (for 525-line mode only)
3 VITC field mark Time data
5 Playback
condition mark