Sharp OZ-640 - Manual (Page 75)

7 4
* The Auto power off function (see p.12) is disabled in all
transfer modes.
When transferring data from other models, only entries in a
mode (application) supported on the OZ-630/ 640/ 650
Organizer can be sent.
Transferring between two OZ-650 Organizers
Data can be transferred directly between two OZ-650
Organizers via the infrared port. Single entries or all the entries
in an application can be transferred in the Schedule, To Do,
Ann, Memo, Expense, Tel and User File applications.
The transfer procedure differs according to whether single
entries or complete files are to be transferred.
* Press [ON] at any time to interrupt and cancel a transfer.
* After a transfer, the display returns to the application being
used before the transfer procedure was begun.
* No peripheral devices are required to transfer data via the
infrared port. However, infrared transfers are easily affected
by ambient conditions which may interfere with this type
of transfer. Connecting the two units directly using the 4
pin cable will ensure a more reliable transfer. See p.76
Transferring Data
There are several ways to transfer information - whether specific
entries or entire files - between the Organizer and other
information processing devices, including personal computers
and other SHARP Organizers. In this way, you can back up
your information to guard against losing it, or copy information
so that you or someone else can work with it on another device.
A summary of transfer devices, transferable data, and tasks to
which a transfer device is most suited is provided in the table
below.
* Only OZ-650 Organizer has the function of infrared transfer.
* Depending upon the SHARP or third-party software you
are using, some features and capabilities may vary.