Siemens Gigaset SL 740 - Manual (Page 53)

52
Base station settings
SL 740/SL 745 / IM-englisch / A31008-L740-N102-1-7619 / settings_bs_hs.fm / 15.07.2004
Changing the system PIN
You can change the base station's default
4-digit system PIN to a 4-digit PIN which is
known only to you.
v
¢
Ð
¢
Base
¢
System PIN
~ If required, enter the current
system PIN and press OK .
~ Enter new system PIN. For
security the PIN is shown as
four stars (****).
s ~ Scroll to the next line, repeat
the new system PIN and press
OK .
a Long press (idle status).
Assigning authorisations per handset
You can block handsets for external calls.
You can assign the following
authorisations:
u Call Barring Off : The handset can be used
without restriction.
u External Calls : The handset can be used
to make internal calls. External calls can
be accepted.
u Internal Only : The handset can only be
used to make internal calls.
u Display list of handsets.
s v Select handset and open
menu.
HS Call Barring
Select and press OK .
~ Enter system PIN and press OK .
s Select authorisation and press
OK .
a Long press (idle status).
Emergency numbers
Emergency numbers are preset to local
requirements. You can enter your own
emergency numbers. The emergency
numbers are valid for all handsets.
Emergency numbers can still be dialled
even if your handset is barred for external
dialling.
Entering or changing an emergency
number
v
¢
Ð
¢
Base
¢
Add. Features
¢
Add. Emerg. No
~ Enter system PIN and press OK .
~ Enter or change emergency
number.
© Press the display key.
Save Entry Select and press OK . The entry
is stored.
Displaying and dialling an emergency
number
Emergency numbers can still be dialled
even if your handset is barred for external
dialling (p. 52) directly or as follows.
Precondition: The handset is blocked for
external dialling.
c Press the talk key.
EmerCall Press the display key. The
available emergency numbers
are displayed. If only one
emergency number has been
stored, this will be dialled
immediately.
s Select the emergency number
and press OK . The connection
is set up.
If an access code has been set up (p. 54),
this will be placed in front of the
emergency number automatically.
You can still dial emergency numbers
despite authorisation blocks (p. 52).
When the keypad lock is active (p. 7), you
cannot call emergency numbers.