Notes on the operating instructions, Return to idle status – Siemens Gigaset SL 740 User Manual
Page 10
9
Operating the telephone
SL 740/SL 745 / IM-englisch / A31008-L740-N102-1-7619 / starting.fm / 15.07.2004
Return to idle status
Reverting to idle status from anywhere in
the menu:
u
Press the end call key
a and hold
down or
u
Press no key: The display
automatically reverts to the idle status
after 2 minutes.
Changes which you have not confirmed/
stored by pressing
OK
,
Yes
,
Save
,
Send
or
Save Entry
OK
will be rejected.
The display in idle status is shown on
Notes on the operating
instructions
The following symbols are used in these
operating instructions:
Copy Entry
/Copy List
Choose one of the two menu
functions (the slash / means
"or").
~
Enter numbers or letters.
Save
The current functions for the
display keys are shown reverse
highlighted and are offered in
the bottom display line. Press
the display key underneath to
launch the function.
q
Press the top or bottom of the
control key (scroll up or
down).
r
Press the right or left side of
the control key (e. g. select
setting).
c/Q/ * etc.
Press the handset key shown.
The operating instructions show the steps
you have to take in abbreviated form. This
is shown below using "Handsfree Volume
setting" as an example:
1. With the handset in idle status, press on
the right of the control key to open the
main menu.
Use the control key to move to the
ï icon. This is done by pressing the
appropriate arrow on the control key.
Audio Settings
appears on the top line of
the screen. Confirm the selection by
pressing the display key
OK
. You will see
the Audio Settings menu.
2. Press the bottom of the control key
repeatedly until the menu function
Handset Volume
is selected, and confirm
the selection with
OK
.
3. Press the left (quieter) or right (louder)
side of the control key to select the
required volume.
4. Press the display key under
Save
to apply
the change.
5. Press and hold the end call key to return
to the idle status.
v
¢
ï
(1.)
Handset Volume
Select and press
OK
.
(2.)
r
Select volume.
(3.)
Save
Press the display key.
(4.)
a
Long press (idle status).
(5.)