Siemens Gigaset SL 740 - Manual (Page 41)

40
Operating more than one handset
SL 740/SL 745 / IM-englisch / A31008-L740-N102-1-7619 / registration.fm / 15.07.2004
Operating more than one
handset
Registering handsets
You can register up to six handsets with
your base station.
A Gigaset SL74 handset can be registered
on up to four base stations.
You must initiate handset registration on
the handset and on the base station.
The base station search is cancelled after
60 seconds. If registration has not been
completed inside this time, repeat the
process.
On the base station
Press and hold the Registration/Paging key
on the base station. Registration is
initiated.
On the handset
Gigaset SL74 on Gigaset SL740
v
¢
Ð
¢
Handset
¢
Register H/Set
s Select base station, e.g. Base 1
and press OK .
~ Enter the system PIN of the
base station (the default is
0000) and press OK .
In the display you will see for
example Base 1 flashing.
Other handsets with GAP functionality
To connect other handsets, start to
register the handset as described in its
operating instructions.
De-registering handsets
You can de-register any registered
Gigaset SL74 handset from any other
registered handset.
u
Open list of internal users.
Your own handset is marked
with <.
s Select the internal user you
want to de-register.
v Open menu.
De-reg. H/Set No.
Select and press OK .
~ Enter current system PIN and
press OK .
Yes Press the display key.
Looking for a handset ("Paging")
You can use the base station to look for
your handset.
Briefly press the Registration/Paging key
on the base station. All the handsets will
ring at the same time ("Paging").
End paging:
÷/c Briefly press the Registration/
Paging key on the base station
or the talk key on the handset.
______ Internal ______1
Call All
INT 1 <
Anna
О ¨