Siemens Gigaset SL 740 - Manual (Page 18)

17
Using the directory and lists
SL 740/SL 745 / IM-englisch / A31008-L740-N102-1-7619 / directories.fm / 15.07.2004
Setting the message key to "flashing"
Precondition: There is still at least one
new entry in one of the lists.
f Open
caller list.
Mark as new
Select and press OK .
a Long press (idle status).
Caller list
The numbers of the last 30 incoming calls
are stored. Depending on the Calls Settings
set, either All Calls or only Missed Calls are
stored (page 17).
Several calls from the same number are
stored
u more than once when All Calls is set.
u once (the last call) when Missed Calls is
set.
Here is an example of how the calls list
appears in the display:
Caller list settings
f
¢
Calls List: 01+02
¢
v
¢
Calls
Settings
Missed Calls /All Calls
Select and press OK .
The current setting is marked
with ‰.
a Long press (idle status).
Changing the list type does not affect the
existing entries in the list.
Opening the callerlist
f Press.
Select if necessary and
press OK .
Calls List: 01+02
Select and press OK .
q Select the entry.
The last call received is displayed in the
calls list.
Example of a list entry:
The list entry shows:
u The list type (in the header)
u The status of the entry
New Call
: New missed call.
Old Call : Already read entry.
Answ. : Call was taken (only with All
Calls ).
u Serial number of the entry
Example: 01/02 means the first entry of
a total of two entries.
u Caller's number or name
How to add the caller's number to the
directory is described on page 14.
u Date and time of call
Calls List: 01+02
Number of new entries
Number of the old,
read entries
____ Missed Calls___
New Call
01/02
1234567890
12.07.03 09:45
Delete Call