Siemens HiPath 4000 - Manual (Page 9)

Basic operating instructions
9
Step by Step
How to access a function
... using codes
qhh Activating call forwarding
rhh Activating call forwarding
qm Entering a callback request
rm Cancelling a callback request
When you activate or switch on a function, you always
begin by pressing the "star" key; when you deactivate,
switch off or cancel a function, you always begin by
pressing the "square" key.
As the examples show, codes can consist of either one
or two digits.
... using UK codes, Standard codes, Euro
codes, special codes and system codes
System Support will inform you which codes apply to
your HiPath 4000 system.
The Appendix to these Operating Instructions contains
an overview of the possible codes.
If your optiPoint 410 entry does not have a "store" key,
storage of a call forwarding destination can be initiated
by lifting the handset and dialling the special code.
Replace the handset once you have entered the call
forwarding destination.
Note that all these types of codes are included in the
descriptions in the central part of these Operating In-
structions.
... using a function key
You can activate directly those functions for which a key
has been programmed, for example:
Press the key. The function is executed
(if it is available in the particular situation). Consultation