Siemens HiPath 4000 - Manual (Page 25)

Make a call – Comfort Functions
25
Step by Step
Making a conference call
With a conference circuit, you can converse with up to
seven other persons simultaneously. These can be in-
ternal or external users.
Setting up an add-on conference
Precondition: The "Consultation" and "Conference"
keys have been configured on your telephone.
n Lift the handset.
p Call the first user.
After speaking to the first user: press the key. The lamp
lights up.
p Call the second user. The first party waits.
After speaking to the second user: press the key. The
lamp lights up.
or qm or qg Enter the UK code or Standard code for conference.
If your telephone does not have a "conference" key:
Enter the code for conference.
A tone indicates that all three users have been intercon-
nected to form a conference circuit.
All three parties can now converse with one
another.
Entering commands with tone dialling
(DTMF suffix dialling)
After dialling a number, you can set tone dialling in order
to activate equipment - such as an answering machine
or an automatic information or switching system - by
means of command inputs in DTMF mode
(DTMF = dual-tone multifrequency dialling).
qr Switch over to tone signaling.
Consultation
Conference
This feature is not applicable for UK and other
countries using tone dialling (default).