Siemens HiPath 4000 - Manual (Page 37)

Make a call – Comfort Functions
37
Step by Step
or r Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
pr Enter the number of the destination and confirm your
input with the square key.
or r Press the square key only
(the telephone on which you are storing call forwarding
thus becomes the call forwarding destination).
Wait for the acknowledgment tone.
Press the key. The lamp goes out.
Call forwarding is thus activated.
t Replace the handset.
Storing a destination for fax, PC
or "busy"/activating call forwarding
n Lift the handset.
Press the key. The lamp lights up.
p Enter the code for the type of call forwarding required.
The codes are defined by System Support. You can en-
ter your call forwarding codes in the following table:
pr Enter the number of the other terminal and confirm
your input with the square key.
pr Enter the PIN of the other terminal and confirm your in-
put with the square key.
or r Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
pr Enter the number of the destination and confirm your
input with the square key.
or r Press the square key only
(the terminal at which you are storing call forwarding
thus becomes the call forwarding destination).
Press the key. The lamp goes out.
Call forwarding is thus activated.
t Replace the handset.
Store
Store
"Call forwarding for fax": *43
"Call forwarding for PC": *42
"Call forwarding for busy": *49
Store